产品中心
斯特封
Slip ring combined seal
Performance and Purpose:
Slip ring combined seal is made up of low-friction PTFE composite slip ring and O-ring. It has the advantages of friction resistance, temperature resistance, high pressure bearing ability, high linear velocity, small friction force and long use-life. And which is applicable to dynamic and static seal of hydraulic and pneumatic system in aircraft, metallurgy, petroleum, chemical, textile, food industry and so on.
由低摩擦聚四氟乙烯(PTFE)复合材料滑环与O形圈组合而成的组合密封具有耐磨、耐温、耐压、线速度高、摩擦力小和使用寿命长的特点。适用于航空、冶金、石油、化工、纺织、食品等行业的液压与气动系统的动、静密封。
Advantage
- The structure is simple, easy to install and can be used repeatedly
结构简单,安装方便,可重复安装使用
- The sealing performance is reliable and adjustable
密封性能可靠,密封性可调节
- Different types of PTFE materials(Self pressed PTFE barrel material) can be selected according to the working conditions of sealing environment
自主压制四氟桶料,可根据密封环境工况选择不同类型四氟材料
- The working life of dynamic pressure seal is 5 ~ 10 times higher than that of conventional rubber sealing products, and the highest working life can reach dozens of times
工作寿命高,动态压力密封工作寿命比常规橡胶密封制品高5~10倍,最高可达数十倍
- It can be used as oil-free lubrication seal
可作无油润滑密封
- The friction force is small, and the dynamic and static friction force are equal. The friction force is 1 / 2 ~ 1 / 4 of the O-type rubber ring, which can eliminate the "crawling" phenomenon of motion at low speed and low pressure.
摩擦力小,且动、静摩擦力相等,是O型橡胶圈的1/2~1/4,可消除低速低压下运动的“爬行”现象
Sample of marking
ST—I 70 X 6.3
Groove width b
Diameter d of piston rod (axis) (Diameter D for sealing hole)
Pistion rod (axis) sealing (Ⅱ-Hole sealing)
Step seal
ST—Ⅰ沟槽尺寸
ST—ⅠGroove dimensions
轴径 Axis diameter d(f8) |
沟槽底径 Groove bottom diameter D(H9) |
沟槽 宽度 Groove width b+0.2 |
O形圈截面直径 Section diameter of O-ring d2 |
内圆角 Fillet R |
外圆角 Round r |
径向 间隙 Radial clearance S≤ |
倒角 Cham-fer Z≥ |
8~18 |
d+7.3 |
3.2 |
2.65 |
0.5~0.6 |
0.3 |
0.4 |
2.0 |
19~37 |
d+10.7 |
4.2 |
3.55 |
0.8~1.0 |
0.5 |
3.0 |
|
38~199 |
d+15.1 |
6.3 |
5.30 |
1.0~1.3 |
0.3 |
0.5 |
5.0 |
200~255 |
d+20.5 |
8.1 |
7.00 |
1.5~1.8 |
0.6 |
6.0 |
|
256~649 |
d+24.0 |
8.1 |
7.00 |
1.5~1.8 |
0.6 |
6.0 |
|
650~1000 |
d+27.3 |
9.5 |
8.60 |
2.0~2.5 |
0.8 |
8.0 |
ST—Ⅱ沟槽尺寸
ST—ⅡGroove dimensions
缸径 Cylinder diameter D(H9) |
沟槽底径 Groove bottom diameter d(f8) |
沟槽 宽度 Groove width b+0.2 |
O形圈截面 直径 Section diameter of O-ring d2 |
内圆角 Fillet R≤ |
外圆角 Round r |
径向 间隙 Radial clearance S≤ |
倒角 Chamfer Z≥ |
8~16 |
D-4.9 |
2.2 |
1.80 |
0.3~0.5 |
0.3 |
0.2~0.4 |
1.5 |
17~26 |
D-7.3 |
3.2 |
2.65 |
0.5~0.6 |
0.2~0.4 |
2.0 |
|
27~59 |
D-10.7 |
4.2 |
3.55 |
0.8~1.0 |
0.2~0.4 |
3.0 |
|
60~199 |
D-15.1 |
6.3 |
5.30 |
1.0~1.3 |
0.3 |
0.2~0.4 |
4.0 |
200~255 |
D-20.5 |
8.1 |
7.00 |
1.5~1.8 |
0.3~0.5 |
5.0 |
|
256~669 |
D-24.0 |
8.1 |
7.00 |
1.5~1.8 |
0.3~0.5 |
6.5 |
|
650~1000 |
D-27.3 |
9.5 |
8.60 |
2.0~2.5 |
0.5~0.8 |
8.0 |